| Product type | AC servo drive |
| Function | Servo drive unit for one-axis motion control |
| Control method | Vector control with servo feedback |
| Rated output | 2.0 kW |
| Input voltage | 200 to 230 V AC, single-phase |
| Maximum current | 6.0 A |
| Feedback type | Incremental encoder |
| Communication protocol | RS-422/485, optional |
| Protection features | Overcurrent, overvoltage, undervoltage, and overtemperature protection |
| Operating temperature | 0°C to 40°C |
| Enclosure rating | IP20 |
| Weight | 1.64 kg |
| Manufacturer | Mitsubishi |
| Product line | MDS Servo Drives |
What is the Mitsubishi MDS-C1-V1-20?
The MDS-C1-V1-20 is a Mitsubishi MDS Servo Drives AC servo drive with a rated output of 2.0 kW (2000 W).
What input voltage does the MDS-C1-V1-20 require?
It requires a single-phase 200–230 V AC input.
What control method does the MDS-C1-V1-20 use?
It uses vector control with servo feedback for closed-loop motion control.
What feedback device is included?
An incremental encoder is provided as the standard feedback device.
What is the maximum current rating?
The maximum current rating is 6.0 A.
What communication option is available?
An optional RS-422/485 communication interface is available.
What operating temperature range is specified?
The specified operating temperature range is 0°C to 40°C.
What protection features are included?
The drive includes overcurrent, overvoltage, undervoltage, and overtemperature protection.
What is the enclosure rating?
The enclosure rating is IP20, intended for indoor use and not sealed against dust or moisture.
Is there a replacement model listed in the manual?
The manual lists MDS-C1-V1-20-N/NA as the replacement model for MDS-C1-V1-20.
Does the Mitsubishi MDS-C1-V1-20 come with a warranty?
Yes. The MDS-C1-V1-20 is backed by our 24-Month Replace Industrial Warranty, with no rush fees or hidden warranty charges. If a unit fails under normal use within the warranty period, we repair or replace it.
Is this MDS-C1-V1-20 a genuine Mitsubishi part?
The MDS-C1-V1-20 is sourced and verified independently. Replace Industrial is not an authorized distributor, affiliate, or representative of Mitsubishi, and all warranties are provided directly by Replace Industrial.
Is the Mitsubishi MDS-C1-V1-20 new or used?
We offer the MDS-C1-V1-20 in multiple conditions, from unused surplus to professionally reconditioned units. Every option is sourced and verified independently and covered by our 2-year replacement warranty.
What are the key ratings of the MDS-C1-V1-20?
The MDS-C1-V1-20 runs on 200 to 230 V AC, single-phase, communicates over RS-422/485, optional, and operates across 0°C to 40°C.
What is the Mitsubishi MDS-C1-V1-20?
The MDS-C1-V1-20 is a Mitsubishi MELDAS AC servo drive.
MDS-C1-V1-20
The Mitsubishi MDS-C1-V1-20 is a 2.0 kW AC servo drive from the MDS Servo Drives series, designed for precise industrial motion control. It operates on a single-phase 200–230V AC supply and uses vector control with servo feedback for accurate closed-loop performance. The drive provides a maximum current of 6.0 A, standard incremental encoder feedback, and optional RS-422/485 communication. It includes overcurrent, overvoltage, undervoltage, and overtemperature protection, with an IP20 enclosure and an operating temperature range of 0°C to 40°C.
All products are covered by our 2-Year (24-Month) Replace Industrial Warranty. If a unit is found defective under normal use within the warranty period, we repair or replace it at no additional cost, and a unit may be returned for a full refund within 30 days if returned in the same condition it was sent.
Replace Industrial is an independent distributor and does not convey the manufacturer's warranty; all warranties are provided by Replace Industrial alone. Read the full warranty policy
We repair a wide range of industrial automation equipment, including PLCs, HMIs, drives, servo motors, switches, and circuit breakers, with rush service for critical downtime. Request a quote, ship your unit, and we diagnose, repair, and return it. Request a repair quote
Our standard shipping method is UPS Ground. We can also ship on your FEDEX or DHL account.
We can ship many items our the same day via Overnight or 2 Day Shipping.
We currently only collect tax from customers in the state of North Carolina. If you are exempt on your purchase, please email your Sales Tax & Use Exemption Form to sales@replacenc.com.
If you are checking out via a quote we send you, there is an option to upload your form at the time of purchase.
If you have already placed an order, please send us your form and we can refund the charged taxes.
