Blog

Learn about Allen-Bradley PanelView HMIs, industrial applications, harsh environments, common failures, and how to identify the correct replacement.

Troubleshoot common Allen-Bradley PanelView problems including blank displays, touchscreen issues, communication errors, unexpected restarts, boot problems, and intermittent operation.

When you come across a "Safety Network Number Mismatch" error, it usually means there’s a discrepancy between the configured network number in your safety module and what is expected by the safety controller.

Replace Industrial does more than just sell parts. The company also helps businesses determine whether automation equipment should be repaired or replaced.

In an automated system, the Human Machine Interface (HMI) is where people and machines meet. It is how operators start equipment, monitor performance, diagnose faults, and keep production moving. When the HMI is poorly chosen, even the best PLC program and hardware can become difficult, inefficient, or unsafe to operate.

When automation equipment fails, a down line can get very expensive. We help companies make the determination whether repairing or replacing their industrial automation makes sense for them.

By following these steps, you should be able to establish a connection to your Allen Bradley 1769-L33ER CompactLogix controller and begin monitoring it as needed.

Choosing the right Panelview, especially as some units are obsoleted or at end-of-life can be difficult or expensive. We are here to help support customers that need either option. Below is a guide to the key differences.

Migrating your Systems from PLC 5 to ControlLogix can be a challenge, and a large expense. Here is a quick guide of what to consider when migrating and some options to buy obsolete/discontinued PLC 5 cards, if you choose to stay.

Are you looking to change the IP address on your 1734-AENTR module? This blog post will guide you through the process step by step.